If you are having any type of problem with your clothes dryer not working properly, you should replace the Clothes dryer Thermal Fuse or call appliance repair service in Toronto.
You will need a Thermostat Kit which contains a thermal cut-off fuse, a high-limit thermostat, and also an electric link cord. You will certainly use this set to change your clothes dryer’s blown cut-off fuse and thermostat. The devices needed are a 1/4 ″ nut driver, flathead screwdriver, and cord cutter/stripper.
Until you start, ensure your clothes dryer is unplugged or the breaker is shut off. In order to transform the thermal cut-off fuse you need to remove all the screws that hold the back panel on. Also eliminate a small panel where the follower lies. At the top of the heater box you will certainly see the thermal fuse. Use a small flathead screw driver to pop up the terminals. The thermal fuse will certainly release a 1/4 ″ nut driver.
Afterwards, take out the high-limit thermostat, located near the bottom with a flathead screwdriver. Then with the help of the screwdriver eliminate the thermostat terminal from it. Currently you can install your new thermal fuse and also thermostat in the same location you got rid of the old one. First you should set up the thermal fuse and after that you could install thermostat.
When you mount the thermostat you need to cut the jumper cable with wire cutter and then strip it back little. Take the gold double adapter as well as attach it to the wire. The following step is to cut the orange wire and also strip it back. Now connect the silver connector to the cord.
Now you can set up the thermostat in its corresponding position and also plug in the thermostat cables respectively. After that attach the red wire with the gold adapter to the orange cord with the silver adapter. Attach it to the bottom of the brand-new thermostat. Connect the various other end of the wire to the burner incurable. Re-install the back panel of the clothes dryer. Connect the clothes dryer back in as well as check the clothes dryer.
If this whole procedure looks a little complicated, you can always call our appliance repair company. We will be more than happy to assist you.
